3D Printed SD Card Container

Lately, I have been working on a lot of projects with my Raspberry Pi. One of the best things about the Raspberry Pi is that you can switch out the operating system just by plugging in a new SD card. As a result, sooner or later there will be multiple SD cards laying around your workspace. I was finding it hard keeping track of all of these SD cards so I decided to build a SD card container to keep all of my memory cards organized.

To start, I found the standard dimensions for an SD card. The standard dimensions are contained in the SD card specification and are shown below.

Top View

Top View

Side View

Side View

With these dimensions in mind I was able to sketch a simple container that is able to hold up to 10 SD cards. I used Sketchup to design the container and exported the STL file.

Included with the container is also a cover. Both the container and the cover are available here for download.